Free calculators for glass neon and LED sign makers

How many modules will this letter take? What size power supply runs them? Is 10 metres of 1mm cable too far at 12V? We answer questions like these on the phone every day, so we've put the same sums on the website, free for anyone to use.

LED tools

  • LED module planner: choose letters, a box or a tray, enter the inside depth and either the inside width and height or the total face area of the letters. It suggests which Letro modules suit that depth, how far apart to space them and roughly how many you need.
  • LED power supply calculator: pick the module (or enter the watts per module) and the number of modules, then choose 20%, 25% or 30% spare capacity. It recommends a Global Power GPV supply and warns you if a run is longer than the module datasheet allows.
  • LED flexstrip calculator: choose the MW Lighting or Letro strip, colour, total length and number of runs. It works out the load, the feed points and the power supply, and how many rolls to order.
  • Voltage drop calculator: enter the supply voltage (12V or 24V), the load on the cable in watts, the one-way cable length from the power supply to the LEDs and the cable size. It shows the drop and the smallest cable that keeps it under the limit you set.
  • Hansen driver picker: enter the LEDchain or LEDtube colour and either the length or the number of LEDs, and it picks the C25, C50 or C100 driver.

Glass neon tools

  • Sign artwork calculator: upload a DXF, SVG, PDF, PNG or JPG and enter the real size. For LED letters it measures the face area and lays out modules. For glass neon it measures the tube length along drawn lines, or around the outline of filled shapes, adds your allowance for bends and waste, and estimates how many glass sticks to order. A DXF drawn in millimetres sizes itself, so there's no scaling to get wrong.
  • Neon calculator: enter the tube diameter, the number of sections and the total glass length. It gives the voltage needed for Hansen convertors (blue gas indoors, blue gas outdoors, neon gas) and for SIET transformers (blue, 50/50, H-gas, argon and neon). The artwork calculator can pass its figures straight across.
  • Neon dimmer and flasher picker: list the transformers on the sign with their quantity and primary current. It adds up the load and suggests a dimmer or flasher rated for it.

What they are, and what they aren't

They're the checks we'd do for you on the phone, so you can work a job out when you're pricing it at nine at night. Each result shows the figures it used, so you can see how it got there.

They're a starting point. They don't replace the manufacturer's instructions or your own check of the installation, and the neon voltages are estimates that don't include electrode length. If a result looks odd or the job is unusual, call us on 01892 783 900 and we'll go through it with you.

All the calculators and guides are on the Tools and guides page.

Back to blog